Sikadur-Combiflex® SG-10 P
High performance joint and crack sealing tape
Sikadur-Combiflex® SG-10 P is a flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. Thickness 1,0 mm.
The product is part of the Sikadur Combiflex® SG System.
- Advanced adhesion, no activation on site required
- Highly flexible - high crack and joint bridging ability
- Good chemical resistance
Usage
Sealing all types of joints and cracks in many different structures and applications including:
- Tunnels and culverts
- Hydroelectric power plants
- Sewage treatment plants
- Basements
- Water retaining structures
- Drinking water reservoirs
Sealing of:
- Movement joints
- Construction joints
- Pipe penetrations
- Cracks
- Building components where differential settlement is expected
Packaging
1 roll of 25 m length
Refer to current price list for packaging variations
Advantages
- Advanced adhesion, no activation on site required
- Highly flexible - high crack and joint bridging ability
- Good chemical resistance
- Weathering and UV-resistant
- Root penetration resistant
- Performs well within a wide range of temperatures
- Plasticiser-free
- Hot air weldable
- Can be used in contact with potable/drinking water
Colour
Flexible light grey membrane
Product Details
APPROVALS / STANDARDS
- Drinking water AS/NZS 4020, Sikadur Combiflex® SG , ams Laboratories, Test report No. 1116525
- Drinking water KTW, Sikadur Combiflex® SG , HY, Certificate No. K-248079-14-Ko
- Root Resistance CEN/TS 14416, Sikadur Combiflex® SG, SKZ, Test report No. 89643/09
- Sanitary Compliance XP P 41-250, Sikadur Combiflex® SG , CARSO, Certificate No. 16 MAT LY 108
- Water Regulations up to 50 °C BS6920-1:2000, Sikadur Combiflex® SG, WRAS, Approval No. 1708503
Composition
Modified flexible Polyolefin (FPO)
Thickness
1,0 mm
Width
10, 15, 20, 25, 30, 40, 50, 100, 200 cm
Length
25 m roll
Shelf life
36 months from date of production
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions. Opened and unprotected rolls must be used within 2 months. Always refer to packaging.
System Structure
Refer to Sikadur Combiflex® SG System data sheet.
Shore D Hardness
35 | (DIN 53505) |
Resistance to Root Penetration
Pass | (CEN/TS 14416) |
Tensile Strength
| > 12 N/mm2 | (EN 12311-2) |
Elongation
> 650 % |
Maximum permissible permanent elongation | <10 % of non-adhered tape width |
Note: For higher joint movement, loop tape into the gap of the joint.
Tear Strength
| > 50 N/mm | (EN12310-2) |
Seam Strength
> 300N/50 mm | (EN 12316-2) |
> 400N/50 mm | (EN 12317-2) |
Foldability at Low Temperature
Passed | (EN 495-5) |
No cracks at -40 °C
Watertightness
6 bar / 72h | (EN 1928-B) |
Behaviour under hydrostatic pressure
Chemical Resistance
Tested according to EN 1847. Contact Sika Technical Services for additional information.
Resistance to Weathering
Artificial weathering:
| 7500 h passed | (EN ISO 4892-2/-3) |
Reaction to Fire
| Euroclass E | (EN ISO 11925-2, classification to EN 13501-1) |
Service Temperature
-40 °C min. to +60 °C max
Application
Ambient Air Temperature
+0 °C min. / +60 °C max. (dry conditions)
Substrate Temperature
+5 °C min. / +45 °C max.
(Sikadur® epoxy adhesive temperature limits apply)